If the quartzite table is installed in this way, you can not accept it.

Number of visits:information sources:Shandong Kang Jieli New Materials Co., LtdRelease time:2018/3/28

Now the most complex in the whole family decoration is the kitchen, not only to consider the overall layout, but also to take into account every detail. The quality of the table of the cabinet will directly affect the quality of the whole kitchen decoration, so the selection of the material of the cabinet table is very important. At present, our common table materials are natural stone, artificial stone, quartz stone, stainless steel and acrylic, quartz stone selection has become the first choice. Quartz stone countertops are not directly produced by quartzite manufacturers, but also need to be processed at the user's home. There may be some uncertainties in processing. So it is very important to accept the acceptance of the table after the installation of the table!

Quartzite slab is not made after natural mining. It is made of quartz stone factory and die casting equipment. It belongs to the new artificial stone product, also known as synthetic stone. Quartz stone is a brittle polymer composite material, have certain characteristics of thermal expansion and contraction, and there are some shrinkage stress, impact toughness, elongation and other mechanical properties, when the plate is unable to withstand internal stress and serious external impact when there will be a burst of thermal expansion and contraction, so the surface processing should be careful not to bury hidden danger.
Quartz stone plate hardness are higher than the Mohs hardness of 6, to have a certain degree of difficulty for processing, so the seamless stitching of quartz stone countertops before buying should explain, because quartz seamless processing is complex, processing have an extra charge, the so-called seamless mosaic is 50 cm distance table is not to see the seam whether the white, can use dry cloth wipe seams on both sides to see if the pale. The hole, open hole four angle hole hole around the corner, check whether there is a small crack, whether to use a lift around the bottom pad. Check whether the expansion joint is reserved between the table and the wall, and the gap should not exceed 5mm, but it should not be less than 3mm. Before installation, the workers will confirm the size of the drawings and countertops again, adjust the cabinet entry and adjust the cabinet to the same level, if the workers will install the details before installation, you can use your table safely when installed.

Relevant labels:
       TECHNICAL SUPPORT:Jining Network Company FeiXun Network


Free service hotline


Focus on Wechat Public Platform